Import heli help!

veer

Seedling
Hi all,

I just got some new plants from the wistuba import, and they seem to be doing good except for the nutans giant. Its potted in coco chips (well rinsed), getting watered twice a week with very low ppm water, in a bright-ish place.

Does it look too far gone? Im not really sure what to do, or if its just a wating game...

Any help would be much appreciated!
1000033784.jpg
1000033787.jpg
1000033860.jpg
 
I always am suspicious of coco stuff as it used to be very salty. I never use it for Helis. I wouldn't throw the sad looking plants out but I would ditch the coco, bury the plants shallowly in moist LFS (live if you have it), cover with a humidity dome and keep at a coolish room temperature. And wait.....
 
Doesn't look good but who knows ...
I usually bag new hely and ceph when I receive them until they are growing nicely.
It's worth a try.
 
Ive never used coco for Helis. I would recommend a stratum/perlite mix and also bagging during acclimation
I've found established nepenthes dont mind coco but freshly deflasked plants will wilt quite quickly so I think even after several rinses, there is still some level of saltiness noticeable by the plants
 
I haven't bought coco chips/coir for years. The last time I did (after killing a number of orchids), I did daily 24 hour tap water rinses in a big bucket for over a week. By then the rinse water went from TDS off the scale to Toronto tap water of ~150. Then continued rinses with rain water for 3 days to get the rinse water TDS to something around 40-50. Never used it for CP's but it was ok for orchids and less sensitive plants.
 
I agree with the previous comments on the high salt retention of coir chunks and bagging new plants to acclimate. In my case, it took many rinses and soaking the coir over a few days to reduce TDS < 50 ppm. I believe helis are especially susceptible to high salts in their media.

You may want to do another rinse on one of planted pots and measure the flow though again. If TDS > 50 ppm, then that might be the issue, or at least a contributing factor
 
Back
Top