3D printed planter

Jacoda88

Plant
Its really hard to find the right size, right color and right function planters so I decided to design my own
9.5cm X 9.5cm X 11cm height(include the drain saucer)
Printed in PETG @ 100% infill, can be used with or without the drain pan
It can fit a 4" orchid insert if you need to keep the roots aerate


18955
18956
18957
18958
 

Lloyd Gordon

Cactus micrografter newbie.
Staff member
Is it hard to figure out how much each one costs? I guess the plastic and power is easy but the depreciation of the printer would be tricky.
 

Jacoda88

Plant
Is it hard to figure out how much each one costs? I guess the plastic and power is easy but the depreciation of the printer would be tricky.
You can get about 9 sets per 1kg of filament, 1kg of PETG filament cost about $25 to $30CAD on Amazon right now, so about $3.00CAD per planter set.

My printer sometimes prints non stop for weeks without seeing any detrimental effect to the printer, only part I have to replace every once a while is the nozzle which cost about $1 each, so the depreciation factor is not something I have in mind.
 
Top